A：Batter mixing
Pre mixing the oil and others for countunies running,the movement of the planets in the barrel for material mixer planetary motion,thus making the material feeding barrel fully mixing.
B：Aerating
Our aerating system use rotor and stator for more dense mixing needle structure, for the cake raw materilas,bigger chiller and dubble layer cooling system ensure the same cake pulp preparation temperature for the best emulsification.
A：Oil sprayer or paper place system
One by one sprayer on the cake molds for easy demolding after bake
If customer use cup holder paper we also have automatic cup place system
B：Shape cake deposior
Servo depositing more easy to control and operate mechanical structure for easy maintance,the forming flow chat can be see on the touch scream 
C：Layer cake depositor
Reciprocating feeding is to get even batter thickness across the band;1.5 to 2cm is to be left on both sided to avoid the batter spread to oven;
Cake(layer cake/swiss roll) weight control after oven by batter thickness adjustment.
Hot air circulation oven– Convection (indirect) type
The working principle is indirect air impingement, an optimization of the well known convection principle. The heat from the gas burner is exchanged in the heat exchange above the baking chamber. The baking air is not mixed with the combustion air. Direct Impingement ovens are also available, where combustion air is circulated in the baking chamber.
The cake molds will autoamtic comeout form the oven and turn to one or two rolls to demolding.
Layer cake and swiss roll will directly bake on the belt.
A：cooling
Natural cooling and chiller cooling as operational.
Cooling tunnel design for two side of cooling can save 33% energy compair traditional screw type of chiller.
Cooling belt fixed inside the chiller so it wont casue the frosting on the belt or cake.
And less expose for better demolding and longer shelf life for the cake.
B：Cake demolding system
There are two ways of demolding:Vacuum type and pin type.
Both type the demolding head will move fornt&back up&down like a mechinal arm transfer to the cooling belt.
After the cake roll cooling and creaming will go to cutting system,both side of the roll will be cutter first then roll and pack.
If for cup cake or shape cake then the injection filling system will inject the filling insde,to insure the better and more fiilings inside our injection system will has two-step filling.
Bottom&top or side injection system as choice.
The UV Sterilization line is the last process before the packing UV sterilization can make sure the cakes from non-hygiene elements before packing.
For fully autoamtic process we also supplier autoamtic tray cleaning and drying system
Q: What is the difference between hard biscuit and soft biscuit?
A: Normally the hard biscuit needs cutting to different shape, the soft biscuit needs printing the different logo or pattern.
Q: Can the machine make different biscuits?
A: Yes, of course. We can provide the different molds, or make customized molds.
Q: How many pcs can the machine line produce per hour?
A: It depends on the capacity as you need.
Q: Can the machine make hard biscuit and soft biscuit in the same time?
A: No, our rotary forming machine is movable with wheels. You just need to change machine when you make the different type biscuits.
Q: Can you offer the formula?
A: Yes, of course. We will provide the formula for each customer.
Q: If I order now, how long I can get the machine?
A: For the smallest machine, it takes 15-30days. For the exact lead time, it is better to check before your order.
Q: What is the baking time for biscuit?
A: Normally it depends on the biscuit thickness, tunnel oven length and baking speed.
Q: What are the baking solutions you can offer?
A: We can provide gas oven, electric oven, diesel oven, hybrid oven, etc.
Q：Can the soft biscuit machine make hard biscuit?
A: No, they need different rotary forming machine.
Q：If I want to make both soft and hard biscuit which machine should I use？
A: We can provide the whole line to make both biscuits for you.
Real factory not trading company
Let’s have a factory tour, then you will see.
Professional
Our factory has more than 40 years machine manufacturing experience.
There are 12 drawing designers and 20 professional engineers which can offer your technical support anytime and anywhere.
Reliability
Modern factory has more than 200 workers.
Strict quality control system, advanced Germany standard
Machining CNC center provide precise technology process to handle every detail of each machine.
Our professional engineer team offer you the best plan according to your requirements.
High Quality
Machines All machine made in GMP standard factory.
We have the CNC center to keep the machine precious
All machine use SUS304 and sandblasting surface coating handling
